CYF international

» CRYSTAL CAR PLUS

Cristal Car Plus is a fast curing one component MS-polymer® adhesive highly viscous and thixotropic.

It is recommended for windscreen replacement ensuring safety and good performance on all types of vehicles.

Cristal Car Plus cures in a short time allowing removal of the vehicle in 1 hour after installation.

May be applied on ceramic coated glass without need of primer.

Cristal Car Plus is non conductive and recommended for use on front and rear windshield with integrated aerials for radio, TV and satellite receiving systems (GSM).

» VITROFIX KIT

Composed by:

• 1 adhesive Vitrofix in 310 ml cartridge

• 1 cleaner in 30 ml bottle

• 1 primer in 30 ml bottle

• 1 metal thread

• 1 rod for primer application

• 1 woven no woven napkin for cleaner

• 1 standard nozzle + 1 special nozzle (with nail)

Colour : Black

» 177 NEOPRENIC ADHESIVE

177 is an adhesive semi-fluid to the touch, suitable for bonding rubber, natural leather, simulated leather and cloth, felt, expanded polyurethane on painted panel, etc.

Its specific application is bonding interior head liners and trim areas.

Is high temperature resistant and therefore suggested in the body-shop for bonding vehicle roof top areas.

It shows high performance level and dries quickly.

» FIX&GO

FIX&GO is a polyurethane two component adhesive designed to repair, bond and reinforce plastic materials. It’s available in two speed version: 1-2 minutes and 5-7 minutes.

In car repair body shops, FIX &GO is recommended to repair and reinforce damaged bumpers, bonding of mechanical supports, logos, moldings, and for general fixing of plastic elements.

FIX&GO is easy to use: it’s low viscosity makes it easy to do fast repair without sagging even when applied in thick layer. Once hardened it is tough and sandable in few minutes; at low temperatures it still shows a certain degree of elasticity.

» CRISTAL CAR

CRISTAL CAR is a one component MS-Polymer adhesive, that cures with air humidity.

CRISTAL CAR is used for bonding and repair of windscreens and glasses on several vehicles. The curing speed is dependent from air humidity and temperature.

It is free from solvent and isocyanates, not flammable and shows very good elastic properties and resistance to ageing.

CRISTAL CAR may be used on serigraphed windscreens withoutthe need of black primer.

» VITROFIX

VITROFIX is a one component fast set polyurethane adhesive sealant recommended for automotive direct glazing.

VITROFIX cures in a short time allowing for removal of vehicle after 3 hours at 23°C and 50% relative humidity (passes FMVSS212)

» MULTIBOND

MULTIBOND is a one component MS Polymer based adhesive sealant with excellent mechanical and adhesive properties designed for the assembly of industrial construction elements and for sealing of concrete, metal and plastic joints where long lasting high mechanical properties are required.

Its characteristics are:

- Rapid and high green strength

- Permanently elastic and tough in short time

- Resists to thermal peaks ( max 30 min at 180°C)

- Odorless, solvent and isocyanate free

- Paintable after skin formation with most common paints

- Resists to mild chemical agents

- Excellent resistance to weathering agents, sun rays , will not turn to yellow

MULTIBOND is used for:

- Sealing different materials in industrial carpentry and car after market

- Bonding of non weldable materials ( i.e. metal profiles)

- Bonding of metal reinforcements on metal surfaces