PRODUCTS

» RAILWAY

Solutions for RAILWAY

 

» SCP 27 RAIL

VABER SCP 27 RAIL is a water based sprayable coating designed to dampen noise from metal vibration in passengers wagons, floors, engine or equipment rooms, air duct.

 

Applied on vibrating area at a thickness ranging from 1,5 to 4 mm (dry film).

 

Vaber SCP 27 RAIL rapidly dries on surface and after 7-14 days in all its thickness.

 

Once hardened VABER SCP 27 RAIL shows excellent sound damping properties and stone chip resistance, has excellent adhesion on bare and painted metal and good resistance to outdoor climates.

 

It can be applied in thick vertical layers without sagging or dripping.

 

For technical dates refer to technical data sheet.

 

VABER SCP 27 RAIL is fire resistance CEN TS 45545-2 approval (on going Certification according American Standard NFPA 130 and British Standard BS 6853)

 

VABER SCP 27 RAIL is applied as internal coating or on exterior floors of the carriage to reduce noise from vibrating metal in a wide range of vibrating frequencies.

 

VABER SCP 27 RAIL is recommended for use on external parts without the need of a protective paint.

» 918 RAIL

VABER 918 RAIL is a water based sprayable coating designed to dampen noise from metal vibration.

 

VABER 918 RAIL is recommended for use in passengers wagon, floors, engine or equipment rooms, canalizations.

 

Applied on vibrating area at a thickness ranging from 1,5 to 4 mm (dry film),

 

Vaber 918 RAIL rapidly dries on surface and after 7-14 days in all its thickness.

 

Once hardened VABER 918 RAIL shows excellent sound damping properties in relation to a very low weight / area ratio.

 

It strongly dampens sound generated by metal vibration thanks to its viscoelastic properties and excellent adhesion on metal.

 

VABER 918 RAIL adheres on untreated metal sheet (previously treated with antirust primer), galvanized metal stainless steel, aluminum, GRP (apply not in direct contact with water).

 

VABER 918 RAIL is classified M1 F1 in compliance to standard AFNOR NF F 16 - 101.

 

VABER 918 RAIL may therefore be applied as internal coating or on exterior floors of the carriage to reduce noise from vibrating metal.

 

It dampens noise generated in a wide range of vibrating frequences.

 

In case of external application VABER 918 RAIL, once hardened, must be painted (with epoxy, PU or acrylic two component paints) for protection against stone and ice chip and to avoid water absorption.

 

For technical dates refer to technical data sheet.

» 921 RAIL

VABER 921 RAIL is a water based sprayable coating designed to dampen noise deriving from metal vibration at very low temperatures (-20°C) in passengers wagons, floors, engine or equipment rooms, airduct.

 

Applied on vibrating area at a thickness ranging from 1,5 to 4 mm (dry film), Vaber 921 RAIL rapidly dries at room temperature into a flexible coat.

 

Once fully cured it shows excellent flexibility at very low temperature where the majority of other paints break.

 

Therefore its sound damping properties and stone chip resistance at  - 20°C are very good.

 

VABER 921 RAIL has a high viscosity: it can be applied in thick vertical layers or underbody without sagging or dripping.

 

Vaber 921 RAIL is classified M1 F0 in compliance to standard AFNOR NF 16-101

 

VABER 921 RAIL may applied as internal coating or on exterior floors of the carriage to reduce noise from vibrating metal in a wide range of frequencies.

 

When applied on exterior surfaces it is recommended to protect the product from excessive water absorption with an elastic low temperature paint.

» SCP 26 RAIL

SCP 26 is a water based sprayable coating designed to dampen noise from metal vibration in passengers wagons, floors, engine and equipment rooms, canalizations.

Applied on vibrating metal area, SCP 26 rapidly dries on surface and after 7-14 days in all its thickness. Once hardened SCP 26 shows excellent sound damping properties and stone chip resistance, has excellent adhesion on bare and painted metal and good resistance to outdoor climates. It can be applied in thick vertical layers without sagging or dripping.

 

SCP 26 is a fire resistant material certified for application in railway market.

 

SCP 26 is applied as internal coating or on exterior floors of the carriage (train and bus) to reduce noise from vibrating metal in a wide range of frequencies at different temperatures.

 

» BARRIER PAINT

VABER BARRIER PAINT is a water based intumescent paint for the protection against fire or metal panels and structures.

 

The special intumescent raw materials start recting when the temperature of the paint surpasses 250°C generating an insulating foam that protects the metal structure form fire for a certain period of time, thus avoiding the collapse.

 

The Barrier protection time is indicated in minutes and defines the class of the product.

 

The class is a a function of the support and of the thickness of the applied Barrier Paint.

» AVIATION

MÄDER has operated in the Aeronautics sector for over 25 years, developing unique expertise in high-technology paint, satisfying the most stringent specifications at the request of sector industrial firms, designers and manufactures of components and subassemblies.

 

MÄDER's aim is therefore to listen to the needs of industrial firms in the sector and create an R&D "task force" dedicated to innovation needs. The technologies developed are without CMR substances and are mainly water-based: the majority of applications and solutions developed have very low VOC emission.

 

Mäder has SAFRAN, UTC, THALES, EUROCOPTER qualifications, ISO 9001, NF EN9100 and ISO 14001 certifications and is a global partner for all Aeronautical equipment and other manufacturers. Over and above specific studies for each firm, MÄDER is involved with several industrial partners in the ASTECH aerospace centre PHIACRE project financed by the FUI (Inter ministerial development fund) and CEEVO (Val d'Oise Economic Expansion Committee).

 

MÄDER is also a partner of the HARMONY EIS, offering test resources including specific forms of surface treatment. The international distribution of products (outside France) has been entrusted to INTERTURBINE AVIATION LOGISTICS for the MRO markets.

» PLATE GLASS & COSMECTICS

When the beauty of the object combines innovation in its colour and material...

 

MÄDER proposes an extended range of products for architectural plate glass and small bottles, with gloss and mat varnishes, pigmented and colouring bases, solvent-based or water-based, on which serigraphy can be applied without flame treatment, enabling each industrial company to make up its own shades or call upon our skills to make specific, ready to use shades.

 

In partnership with a recognised operator in the field of metallic coatings, we offer a complete range of undercoats and finishing varnishes, cross-linked using an oven or UV.

 

All these ranges of products are developed jointly by our teams based at our sites in Europe, which enables us to offer an extensive range that can satisfy all application conditions and specifications.

 

Partners and suppliers to prestigious perfume houses, our product range also includes packaging: cosmetics, plastics, drinks and medical applications, via its many innovations.

» AUTOMOTIVE

The Mäder Group is world leader in paint and varnish for application to plastics and develops ranges of innovative, environment-friendly products.

 

• Interior decor: Special-effect decorative and harmony shades in solvent and water-based versions
• Exterior decor: Specific solutions for roof bars, handles, rear-view mirrors, trims, radiator grills, etc.
• Steering wheels: Mould-coating and post painting technology
• UV finishes: Colourless and tinted, satin or shiny varnish for scratch resistance and energy saving in high-temperature drying.
• Finishes for metal: A choice of pearl or aluminium finishes and combinations
• Services: Associated techniques, a Design department and technical support

» ELECTRO TECHNICAL

This range of products is a direct continuation of the integration of the Mäder Group into the design of and innovation for resins entering into the formulation of varnishes and paint for Electro technical use.

 

The market for varnish and paint for Electro technical use is a market segment covering insulation supplies for production, distribution and electrical equipment, as well as electrical engineering machines and systems for industry.

 

This market is split into four Business Lines, as follows :

 

• Primary insulation varnish
• Secondary insulation varnish and paint and varnish for insulation film
• Resins for coating electronic components and transformers
• Impregnation varnish for magnetic sheet metal

» HIGH TEMPRATURES

MÄDER designs paint to coat inserts and fireboxes that withstands constraints affecting shades, adherence and protection capability in extreme temperatures, up to a peak of 650°C.

 

These products are available in solvent-based, high dry extract and water-based versions to meet the requirements of all the industrial firms in the sector.

» MARINE

MÄDER makes its technology and know-how available for yachting professionals and amateur enthusiasts, in close collaboration with constructors for woodwork varnish, and in partnership with the brand OCEOPROTEC for anti-fouling coating.

 

For years, MÄDER has been creating very high-quality finish paints for the automotive and aeronautics industries, and now that know-how has been applied to a range of Yachting paints under the brand MÄDER Marine with a range of OCEOPRIMER, OCEOCOLOR, OCEOWOOD and EPOSURF. These products represent the very essence of MÄDER expertise in terms of quality and durability, while at the same time providing applicators with major productivity gains.

 

Particularly in the fields of high-durability single-component glycerophtalic and bi-component polyurethane finish paints, MÄDER offers a unique and innovative concept of tinting machines that enables us to provide a range of more than 60 dedicated sailing colours, and more than 3,000 RAL and NCS colours. A simulation software allows applicators to choose from these colours and different applications, to create and compose their paint application, and to simulate this visual effect on the hulls of boats.

 

MÄDER, the designer of a permanent, non-erodible anti-fouling paint application system, recently acquired the brand Oceoprotec.

 

Thanks to a network of approved applicators, MÄDER is able to offer a range of products for hull protection – Oceoprotec anti-fouling and Oceoseal anti-osmosis – based on a technology that is 100% waterborne and VOC-free.

 

Oceoprotec is an organometallic coating with anti-fouling properties, providing permanent protection for hulls, intended to prevent marine organisms from becoming attached to boat hulls. The aim is to prevent the colonisation of hulls by microorganisms and the growth of a plant bio film, the presence of which considerably slows down boats and proportionately increases their fuel consumption.

 

Once reticulated, the coating becomes an inert, non-erodible film which is non-polluting for the seabed.

 

In contact with water, the electrically charged copper ions (Cu2+) seek particles of opposite polarity, such as bacterias, viruses and fungi. In contact with this ionic field, the microorganisms are neutralised and they escape or transform into a deposit of silt/bio film which can be eliminated manually simply by wiping, or mechanically once the boat is moving.

 

The coating’s hardness and its very low roughness coefficient cause a major reduction in the friction coefficient, contributing to a notable increase in speed, manoeuvrability, and up to 25% in fuel savings, in turn producing a reduction in energy consumption for a dual economic and ecological gain.

 

The Mäder Marine range :

 

• Protection and Finishing of Boats: Oceoprimaire + Ocecolor
• Protection and Finishing of woodwork and boat decks: Oceowood + Oceodeck
• Anti-corrosion Protection: Oceoantico
• Anti-fouling Protection: Oceoprotec
• Anti-osmosis Protection, preventive and remedial: Oceodry + Oceoseal

» GAS

A historic market for MÄDER, our range of products covers all applications to protect storage tanks and bottles of all sizes.

 

Validated by the French butane and propane federation, the CFBP, our product ranges are certified by the Pourquery laboratories according to the standards applicable to above and below-ground storage.

» ANTICORROSION & OFF SHORE

From high external durability systems to off-shore systems.

 

MÄDER has developed a complete anti-corrosion and finishing coat range that guarantees extended use of all your equipment.

 

Thanks to the coordination of the R&D resources of our various production sites in Europe, MÄDER has established a highly efficient range of products for each type of purpose, with certification awarded by external organisms and laboratories such as the Pourquery laboratories.

» AGRICULTURAL & PUBLIC WORKS EQUIPMENT

Present in the sector for 25 years now, we develop single and dual-component paint systems, solvent or water-based, that meet the very strict specifications of the sector.

 

Very efficient in terms of anti-corrosion and exterior durability, our various paint systems come in all the shades specific to manufacturers, and, at the same time, we offer a service to supply all their subcontractors.

» COIL COATING

With a long experience in this business, Mäder offers high quality coatings made of Polyester/Melamin or Isocyanate resin, highly flexible, scratch resistant, with a good weatherability, destined for Architecture (cladding, jalousie, garage doors…), roofing, household appliance, furniture industry…

 

These products are available in a wide range of colors, in particular with metallic or chrome effects.

» FOUNDRIES / WIND POWER

High performance coatings for wind energy equipment and foundries.

 

To meet customer demand at its best, we offer a wide range of products with corrosion resistance, weatherability , conventional or water based dipping paints, one component or two component, oil-resistant.

» PIPELINE

Mäder offers in this business a wide range of products for ductile iron pipes, fittings and armatures on bituminous, PUR or epoxy base.

 

Our product portfolio is certified for the contact with potable water and are referenced in the leading word wide pipeline manufacturers..

» RESERVOIRS & TANKS